Hardcore Sledder banner
1 - 7 of 7 Posts

·
Registered
Joined
·
625 Posts
Discussion Starter · #1 ·
i got a nice cody rigged set of 53 gram weighs in my clutch, i say rigged cuz i got a set that fit the older clutches and drilled the plastic bushings out of them, threw them in with a set of nylon spacers to keep them from sliding back and fourth. then i threw an arctic cat orange and white spring in the primary, the stock helix was a 58*-52* so i threw a 60*-52* in it and a red and white secondary spring and it comes out of the hole hard now. wut do u guys think???

cody
 

·
Registered
Joined
·
9,280 Posts
Sounds pretty close to my set up (CMSCat50's setup that he shared with me)

Dark green/yellow primary spring 160-310
53 gram weights
64-48 Dalton Helix
AC red/white secondary spring

Mine pulls out of the hole around 8000 and slowly climbs to about 8300rpms :div20:

IT RIPS!!!!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top