Hardcore Sledder banner

1 - 4 of 4 Posts

·
Registered
Joined
·
593 Posts
Discussion Starter #1
I adjusted my valves the other night too 38mm. Would this cause the rpms to drop about 400. The cables were about 3.5-4 mm shorter at first. I got passed by a pro-x 800 (modified) on top end which i beat every time we go out. Any imput would help
 

·
Registered
Joined
·
593 Posts
Discussion Starter #3
anybody have any measurements to a correct length. If I remember correctly the manual says 36-38
 

·
Premium Member
Joined
·
1,819 Posts
That's correct. Manual says 36.1-38.1 (1.42-1.50in.). GLS said that it's more important that they are equal than the correct length.
 
1 - 4 of 4 Posts
Top