Hardcore Sledder banner

1 - 4 of 4 Posts

·
Registered
Joined
·
190 Posts
Discussion Starter #1
How are yous guys Ethanol/Regular switches wired?My sled came with one wire off the switch so i went to put it back on and it didn't want to stretch that far so I was wondering if they were both plugged on wrong? One has a red blade connector the other is blue.Wouldn't it be logical if they were in the wrong positions then when you are supposed to be in reg mode you are actually in eth mode?My red connector is on vertical blade and blue on horizontal.Help!!Thanks,Babber
 

·
Premium Member
2014 XF800 137
Joined
·
4,045 Posts
Red on verticle Blue on horizontal is right, but it doesn't really matter.
When unplugged it goes into ethanol mode, this is just a one way switch, thus making contact or not making contact. Switch in reg mode lets current go through, switch in ethanol mode shuts current off from going through. When unplugged current is not going through so it is ethanol mode. Hope I answered your ?
 
1 - 4 of 4 Posts
Top