Hardcore Sledder banner

1 - 5 of 5 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter #1
Hi Guys, bought a 2019 Renegade Enduro 850, looking to fog the engine, used the procedure in the manual but it won't go. the manual shows the steps to do it with a standard cluster, but I assume it is the same with the deluxe model. I toggle the high beam high/low/high/low continuosly and hold the "set" button down per instructions, but it won't go to the next step,
Help!
and
Thanks!!
 

·
Premium Member
Joined
·
580 Posts
Hi Guys, bought a 2019 Renegade Enduro 850, looking to fog the engine, used the procedure in the manual but it won't go. the manual shows the steps to do it with a standard cluster, but I assume it is the same with the deluxe model. I toggle the high beam high/low/high/low continuosly and hold the "set" button down per instructions, but it won't go to the next step,
Help!
and
Thanks!!
Make sure you have the odometer set in the total miles and not in some trip meter setting. has to be in the total miles on the sled before anything will work. Let us know if this works, which it should>>>>>>
 

·
The Meat Man
Joined
·
15,697 Posts
:bc:
 
1 - 5 of 5 Posts
Top