Hardcore Sledder banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,411 Posts
Discussion Starter #1
I was looking over my 2003 service manual that I recived yesterday from Dan(Outdoor Shop) and it shows the Firecat 700 and the Firecat 700 SnoPro to have different engagment rpm's and peak rpm's:

700 standard: 3100 rpm engagement, 700 SnoPro:2500 rpm engagement & peak rpm's listed for the standard F7 is 7800-8000 rpm's and the 700 SnoPro SnoPro is listed at 7250 for peak rpm's....... This must be a typeO in the manual??? Any input? Thanks!
-John
 

·
Registered
Joined
·
64 Posts
The f-7 should run at around 7750, this is not from manual but from artic cat engineer.
 

·
Registered
Joined
·
2,180 Posts
With my clutch set up i am turning 7760-7780 in 660-1000ft
with a full shift out at 7900 over a 3/4 mile run.Stock engagment
was at 3600 now is at 4000.Turned 8000-8100 when stock.
 

·
Registered
Joined
·
1,647 Posts
CC, you may want to bring you rpms down, especially for drag races.
What are you running for a kit, pm me please.
I was meaning to send you some info on what I was running with my F7. It was very very impressive and not too expensive.
 
1 - 5 of 5 Posts
Top