Hardcore Sledder banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,849 Posts
Have to remember, this is a FireCat. Remove the secondary so you can get at the voltage regulator. Once the voltage regulator is off, the bearing should slide right off, key word should.
 

·
Banned
Joined
·
14,035 Posts
All Firecats have the pto side bearings pressed on the drive shaft and jack shaft. The chaincase bearings will slide off the shaft.

Krom
 
1 - 4 of 4 Posts
Top