Hardcore Sledder banner
1 - 4 of 4 Posts

·
Brand loyal, not brand blind
Joined
·
15,275 Posts
Discussion Starter · #1 ·
Several guys have mentioned the 121 rear skid has 7 1/4 wheels vs last years Fuse and this years IQ6 with the 6 3/8 wheels. What changes if any were made to run this bigger rear wheel? I thought the rear skid was unchanged?
 

·
Premium Member
'22 XCR, '17 SB Assault
Joined
·
132 Posts
My Dragon does have the larger size wheel which should help free up some rolling resistance. It appears that it has a straight axle vs. an offset. So I would have to say they raised the mounting location of the axle within the rails. rdlit...........................
 

·
Registered
Joined
·
1,877 Posts
I went through the same thing, almost ordered 8" wheels for my offset axle. Good thing AFJ jumped in and corrected me. So I have some 9" wheels coming to properly accomodate the offset.

The dragon rear idlers are the same wheels used on the RMK and SB's
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top