Hardcore Sledder banner
1 - 3 of 3 Posts

·
Registered
Joined
·
958 Posts
heard a wicked hot holesaw works great for the install. get the holesaw, grab it with a set of channel locks, and get that sucker warm with a torch and shove it through the airbox and then immediately put the bullseye in. no shavings, no scrap edges and a good seal.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top