Hardcore Sledder banner

1 - 2 of 2 Posts

·
Registered
Joined
·
747 Posts
Discussion Starter #1
My riding buddy has an F7. Last week I noticed one of the bolts missing on the bulkhead
where the two halves are bolted together. And a couple were loose. Yesterday he found
two of the bolts that hold the collar for the bearing on the jackshaft were broken. So check
these bolts, and hopefully you don't have to change them. Almost EVERYTHING has to come off.
Steering post, oil tank, hood, etc; about 3 hours of work. Just a heads up.
 

·
Registered
Joined
·
32 Posts
myself and others have found bolts loose and missing on bulkhead near airbox. also pay attention to rear suspension for loose bolts. Use LOCKTITE, or kiss your NUTS goodbye!
 
1 - 2 of 2 Posts
Top