Hardcore Sledder banner

1 - 2 of 2 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
Can't find the spark plug gap spec. either on the machine or in the manual.
Also the manual says the exhaust valve cable free length should be from 36-38mm, mine are at 34mm and and to me seem a little too loose, they come out every once and while. If anything, I'm inclined to go down to 31,32mm to take out some of the seemingly excess slack and maybe the cables won't pop out as easily.
Any and all ideas welcomed.
 

·
Registered
Joined
·
6,976 Posts
Adjust your cable to spec. It will be loose no matter what you have it at. Your performance will increase if it's right. Cat is supposed to be coming out with a fix for the cables coming off problem.

Cat S.
 
1 - 2 of 2 Posts
Top