Hardcore Sledder banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,412 Posts
Discussion Starter · #1 ·
Ok here is the deal I have a 2000 xc sp 600 and the polaris microphish says it takes a 15 spline hyvo gear top and bottom.
And I also have a 2002 edge x 600 that the microphish says it takes 3/4 wide gear. Will these gears interchange with each other???
THe dealer also says that arctic gears will fit on the edge x. But I already know that they dont fit on the 2000 So this is why I am confused any help would be great>
 

·
Registered
Joined
·
3,770 Posts
I think '98 and newer Polaris are all Hyvo.
I wish I knew how to tell them apart now that you ask, the tooth profile is supposed to be different, hope I don't get my old stuff mixed in with hyvo stuff. The real old Polaris ones were narrower, but the old silent chain wide gears would be tough to tell from Hyvo.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top