Hardcore Sledder banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2,210 Posts
Discussion Starter #1
I was wondering what colour springs or what angle helix and what weights I should use in my f5 snopro, I want my sled to engage at 4800-5000 rpm...I want really good bottom end and mid range, I don't really care about top end casue I ride pits and race snowcross

I have 96 1.45inch studs if that helps.
Thanks
 

·
Registered
Joined
·
530 Posts
Dont screw with ur primary talk to Heel clicker. My buddie works for Shocktherapy and he talks to them and he said they make a secondary clutch for around 200 that turns out sled into an animal ur priamry is laready golden leave it alone. Im going with a new secondary from them once i get the $.
 

·
Registered
Joined
·
308 Posts
i would stick with the Driven clutch myself and try a 55/52 helix in there. And for the primary clutch EPI makes a blue spring that really works!!!
 
1 - 3 of 3 Posts
Top