Hardcore Sledder banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
4,427 Posts
They are both a 1/4" pin, there shouldnt be any problem.

I have been told poo's weight work well with the AC clutches. The profile on the non-contact side give muchs better shifts.


Arcticmann, you are right the AC pins are .248, poo bushings are .243. They will need a ream job.

Remember, poo weights shift better, but will cut down on your top speed. :D
 
1 - 3 of 3 Posts
Top