Hardcore Sledder banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
286 Posts
Discussion Starter · #1 ·
Well as i stated before, i'm new to Liquad Cooled machines. I was wondering how do i check my coolent levels on my 03 F7?? Also, if i wanted to drain my coolant and add new stuff, where do i drain it and what type of coolint should i add and what mixture ratio should i use?? thanks, sorry for the noob questions
 

·
Registered
Joined
·
872 Posts


All ive ever done is look at the coolant tank on the right side of the sled and see where the coolant is at. There is a full line. Its a clear tank.

Along that right bulk head there is a hose with a nut on the end. The way i drained the sled it take the can off put the hose through that hole and drain that way.

Then I just filled it with a 50-50 ratio of coolant and water.

thats my experience at least
 

·
Registered
Joined
·
1,292 Posts
full drain is prolly easiest if you pull the hose under the footrest on the right side....along with the one on the base of the motor
 
1 - 3 of 3 Posts
Top