Hardcore Sledder banner

Changing trak pattern from 102-153

475 views 9 replies 4 participants last post by  hate2looz 
#1 ·
Can you simply add two extra studs to the non-widowed lug area? I didn't do my studs the first time, my dealer did. I want to do it this time. If I did this how many would I add?
karl :banghead:
 
#4 ·
Depending on how your original pattern was laid out will determine how effective the extra studs will be IMO. The key is to maximize the no.# of scratch lines.
 
#5 ·
So if I added one per lug area, then it give me three in each space. Or would it be better to add two to each non window. that would give me 138. I just want more bite for take offs. I am also looking to lower my gear. That is why i am thinking of doin it. I spin as it is.
thanks
 
#6 ·
Adding studs directly below the hyfax is the best place for penetration and traction.
 
#10 ·
That's not bad, I think I have 20 or 22. If you put the studs in the closed windows and stagger them you should gain another 4 lines.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top