Hardcore Sledder banner

1 - 20 of 20 Posts

·
Registered
Joined
·
308 Posts
Discussion Starter · #1 ·
We have just joined as a HCS advertiser / sponsor.

All orders from HCS members prior to Nov 30 /2005 will receive FREE return shipping anywhere in the USA or Canada. The minimum order value must be $200.00 or more.

Fireball specializes in ceramic coatings, powder coatings, heat dispersement coatings and internal engine coatings for race or performance applications.

We can ceramic coat your pipes, powder coat your suspension parts, or coat your pistons, heads or engine to maximise part life & performance.

Check out our website for more info.

www.fireballcoatings.com

For US customers, please do not ship via UPS as we are charged 3% brokerage based on the declared value. The easiest / economical method is via the Mail with accelerated service that can be tracked or insured. It takes 3-6 days with mail and has no extra charges attached either way.


Regards,

Mark Stevenson
Fireball Coatings Inc.
www.fireballcoatings.com
519-925-6342
 

Attachments

·
Registered
Joined
·
445 Posts
how much to do the pipes and can for a 98 tcat.thks
 

·
Registered
Joined
·
3,782 Posts
very nice clean work, as I have seen some that are just ugly!

Here's some pics of mine.
My springs are powder coated and the spindles and A arms are ceramic coated, along with my slide rails and clutch cover! :div20:
 

Attachments

·
Registered
Joined
·
290 Posts
You mentioned coating the heads, would that be the inner dome or the outside of the head, which is visible? and if it is the outside how much for 3 heads for a zrt6?
 

·
Registered
Joined
·
3,782 Posts
oh geez, you just reminded me!!! My pistons are ceramic coated on the domes and the skirts are a type of moly coating. All the coating is still there, as I had the top end off this summer.
 

·
Registered
Joined
·
308 Posts
Discussion Starter · #18 ·
Originally posted by ZRT_Racing@Oct 16 2005, 08:36 PM
You mentioned coating the heads, would that be the inner dome or the outside of the head, which is visible? and if it is the outside how much for 3 heads for a zrt6?
<div align="right">index.php?act=findpost&pid=934012
[/quote]


Originally posted by ZRT_Racing@Oct 16 2005, 08:45 PM
Ya i was also thinking bout geting my pistons done too. Allot less chance of burn down right?
<div align="right">index.php?act=findpost&pid=934047
[/quote]


Sorry I didn't see your post earlier.

Coating the pistons is $25.00 CND / $20.00 USD for the ceramic / $25.00 for the moly on the skirts. The combustion chambers are also $25.00 CND each. The ceramic coating helps reduce hot spots on the pistons / heads......it will protect the piston from detonation. It also reduces the rate of expansion when the piston heats up to prevent cold seisures. The moly on the skirts is a lubricant impregnated into the metal. It reduces wear, fricton and prevent cold seisures. Check out out website for more info. The Canadian price list is there. For the US cost reduce 20% from those prices.

Regards,

Mark Stevenson
Fireball Coatings Inc.
www.fireballcoatings.com
519-925-6342
 
1 - 20 of 20 Posts
Top