Hardcore Sledder banner

1 - 3 of 3 Posts

·
Registered
Joined
·
516 Posts
Discussion Starter · #1 ·
How do you remove the carb rack from a 99 XC500?? Got air box out and there is enough fuel line slack. There is an oil line from the pump to carb, can this be diconnected and reconnected or does it need to be bled before connecting?? I just want to change the main jets, any tips?? Thanks.
 

·
Registered
Joined
·
537 Posts
if you disconect the oil line you will have to bleed it.

can't you just remove the carbs from the airbox and the boots and monover them some you can change the jets. :beer:
 

·
Premium Member
Joined
·
4,252 Posts
Once you remove the air box, and pull the carbs out of the boots. You can get the main jets out without taking any lines off the carbs. If your carbs need to be cleaned this would be a good time to do it, but then you would need to remove the lines. :div20:
 
1 - 3 of 3 Posts
Top