Hardcore Sledder banner

1 - 5 of 5 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Hey guys. In the midst of building a trail/sleeper race sled and have it done besides the boondocker programming. Sled is an 09 cfr 1000.. bmp cylinders, head , full exhaust , bigger intake ,..wondering of anyone has a similar setup that might be able to.give me.some numbers. Thanks!
 

·
Registered
Joined
·
1,807 Posts
I went through same thing early this year and got info from both Speedwerx ( have thier exhaust and y pipe) and also Boondocker themselves. Both are very customer friendly. My issue was that Speedwerx uses mostly Powercommander but I had a Boondocker. Try who ever the exhaust is from and Boondocker.
 

·
Premium Member
Joined
·
33,214 Posts
Hey guys. In the midst of building a trail/sleeper race sled and have it done besides the boondocker programming. Sled is an 09 cfr 1000.. bmp cylinders, head , full exhaust , bigger intake ,..wondering of anyone has a similar setup that might be able to.give me.some numbers. Thanks!
With all bmp parts, I'd certainly start with their mapping.

Sent from my SM-G900V using Tapatalk
 
1 - 5 of 5 Posts
Top