Hardcore Sledder banner
1 - 2 of 2 Posts

· Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
IAM INSTALLING D&D TWIN PIPES,CLUTCH KIT D&D,AND I WAS TOLD I NEEDED TO BUY THE BOONDOCKER CONTROLLER FOR THE EFI IS THIS TRUE AND WHAT CAN I EXPECT FROM THESE MODS AS TOP END SPEED AND JUMP OUT OF THE HOLE THANKS FOR AND REPLYIES :summer_sucks: :i_need_snow:
 

· Registered
Joined
·
727 Posts
Need the controller to richen up the fuel mixture after the pipes lean the sled down. with the twin pipes I think you will loose take off out of the hole. You will gain around 18 h.p. on top put it is a narrow power band. I would probably go with an after market single pipe that way you still lose weight, loose a little torque and still gain about ten h.p.. On the other hand if you start porting the motor or going with a bigger bore this is where the twin pipes will shine.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top