Hardcore Sledder banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
No there are no good aftermarket belts for the Rev's(diff dimensions from BRP's) low belt life is usually from 2 factors on the Rev's 1) too much heat - remove the plastic part of your belt guard so the clutches can get some cooler air and 2)make sure you keep proper belt deflection(tension) belts will wear if they are run too lose.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top