There is a plug behind the servo motor and another one up behind the speedo. Brown and yellow wires. I used the one up by the speedo and ran a jumper down along with the wiring harness then connected my shield plug. There are several places to put the shield plug, if you have the wire end as I did I ran it up the steering post and between the handle bar risers and out under the pad with a tywrap to hold it. Works great and is a very easy install. Good Luck!
My buddy did one for his. He mounted it on the other side from the key in that open space. The is an auxiliary wire that he ran to it but I'm not sure where it routed. There was a post about a week ago that had the locations.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
A forum community dedicated to snowmobile owners and enthusiasts. Come join the discussion about performance, trails, riding tips, modifications, classifieds, accessories, troubleshooting, maintenance, and more!