Hardcore Sledder banner
1 - 7 of 7 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter · #1 ·
OK so ive got pretty much every thing done on my 07 iq 440 ive got the big tank low comp heads, and timing selector.....now all i need is the extra boggy wheels or idler wheels what ever you guys call them. i just dont kno how many or what to order ...any help would be appriciated
 

·
Registered
Joined
·
4,990 Posts
go on the polaris parts fiche and they have the optional wheel kit listed on there. i just put two on the outside of my rails on the front of the rear skid
 

·
Registered
Joined
·
4,541 Posts
You will need one of each of these for each wheel you want to install. Lots of guys install 4 wheels but some guys only install 2. Maybe some of the trail guys can give more info on how many to install.

29 7515317 Bolt
30 7515346 Screw
31 7556179 Washer, Spring
32 1590317 Asm., Wheel Bogie
32 3514303 Bearing [1 per Wheel]
32 7718407 Ring, Retaining [1 per Wheel]
33 5631065 Block, Wheel Mount

Here is a Picture of what each of those parts is.

[attachment=405352:bogie_wheels.gif]

You may also want 19, 20 & 25 in the picture above.

19 5132071 Spacer, Bogie Wheel 2 Usage
20 5133232 Shaft 1 Usage
25 1541642 Asm., Wheel w/Hole 2
 

·
Registered
Joined
·
635 Posts
I have both sets in the front...ends up looking just like the '08 RR. Plus I have scratchers for when conditions get bad.
 

·
Registered
Joined
·
635 Posts
what are scrathers?[/b]
Ice Scratchers can be added to either your skis or the front of your rails to help keep a steady spray of snow/ice chips going to both your hyfax and heat exchangers.

This is not my sled but these pics (which came from this forum...can't remember who owns it) show how they look.

When in use, you unhook them and they drag through the snow. When not in use, you can hang them on your skis or rails or just take them off real quick.

[attachment=405652:Ice_Scratchers1.jpg]

[attachment=405654:Ice_Scratchers2.jpg]

[attachment=405653:Ice_Scratchers3.jpg]
 
1 - 7 of 7 Posts
Top