[jimcacace]

does anybody know if it is possible to short out the acc plug behind the servo for the electric shield. my wire fell down onto the running board and sparked and flickered the lights. the shield barely works now. not sure if it ever did because this is when i first hooked it up. please let me know im going to try the other plug tomorrow hopefully ill have better luck

 

[burly1]

Its not just yours,these things dont have enough juice to excite a 90 year old woman.

 

[gunner f5]

Originally posted by burly1@Jan 18 2003, 05:48 AM
Its not just yours,these things dont have enough juice to excite a 90 year old woman.

Checked Volts A/C at 3000 rpm, it's at 11.90 Volts. Obviously at idle there will be less as with ALL sleds. I checked it with all warmers on high and brights on. B)

 

[jimcacace]

so are u saying that yours works fine. what plug r u using.i am still wondering if i could have shorted it out.

 

[gunner f5]

I'm using the plug behind the servo motor. Both accessory plugs produce the same Volts. Try checking the voltage at both accessory connectors just for S and G's.