Hardcore Sledder banner
1 - 8 of 8 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter · #1 ·
was wondering if anyone has a set of 78 belly busters for my 05 fuse. My rpms are a little high and would like to try the 78's.
 

·
Registered
Joined
·
644 Posts
was wondering if anyone has a set of 78 belly busters for my 05 fuse. My rpms are a little high and would like to try the 78's.[/b]
what are you running for helix, springs?
 

·
Registered
Joined
·
127 Posts
Discussion Starter · #4 ·
i have some mtx
adjustables

click on my name and see the picture on my profile page[/b]
I have the epi clutch kit (with 719 helix instead of kit helix). has 76 weights in it. Has stock pipe and can (DAMN N.Y. LAWS!!!!) pulling 7600 rpm- would like to get it down a bit
 

·
Registered
Joined
·
644 Posts
78 bellys aren't going to do it. pick up some more rivets for your mtx weights. 80 grams will bring you closer.
 

·
Premium Member
Joined
·
12,019 Posts
78 bellys aren't going to do it. pick up some more rivets for your mtx weights. 80 grams will bring you closer.[/b]
It didn't work i guess,
 

·
Registered
Joined
·
644 Posts
alsled, no it didn't. it brought it down 100 rpm's. 76 to 7500. not quite enough. going to get weights machined this week try the 80's.
 

·
Premium Member
Joined
·
12,019 Posts
alsled, no it didn't. it brought it down 100 rpm's. 76 to 7500. not quite enough. going to get weights machined this week try the 80's.[/b]

Did you say you had a spring with 10 lbs less on full shift?, Did you try it?
 
1 - 8 of 8 Posts
Top