Hardcore Sledder banner
1 - 2 of 2 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter · #1 ·
I have switch my 440 to a 600 and was wondering if anyone else has run 40mm carbs on theirs. I see most are running the 38's but we got a better deal on a 40mm rack. I'm wondering what needles and pilot it should have in it. Also would the cables for choke and throttle off the 08 racer be the best setup? THANKS
 

·
Registered
Joined
·
522 Posts
ive been running 38s bored to 40.5 and also have tried a stock set of 38s. pretty much there is little difrence if any at all between the 2 as far as jetting. id through all the guts from the 38s and put them in the 40s it should befine.
 
1 - 2 of 2 Posts
Top