Hardcore Sledder banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Wondering if I can use a 15” instead of the 14” track width on my sled I’ve read where some people have done the 128x15” and it ran fine. There just not a lot of options when it comes to the 14” track or least where I’ve been looking. So wanting some opinions on what I can do thanks.
 

·
Registered
Joined
·
1,939 Posts
shouldn't be any issue. Just make sure it has the proper track clips for clearance to the diamond drive case.
 

·
Premium Member
Joined
·
20,093 Posts
Low profile clips, or, you can trim the clips down (just on that left side) so they sit below the rubber same as the original track. 15" will fit otherwise. As will a firecat style 13.5"
 

·
Premium Member
Joined
·
1,883 Posts
I put the 15" x 1.5" on my CFR with zero issues.
 

·
Registered
Joined
·
35 Posts
I run a ( 15 X 1.50 ) Camso on a 09 CFR100 … and a ( Composit 15 X 1.50... I Really like this Composit ) 0n a 11 CFR1000 NO Clip issues.. I also run 4 Wheels on the rear axle..
Not 2 or 3..
Good Luck and Pray or SNOW !
 
1 - 6 of 6 Posts
Top