Hardcore Sledder banner

2003/2004 venture heavy throttle

497 views 0 replies 1 participant last post by  Thartiga 
#1 ·
2003 and 2004 Ventures.

I’ve cleaned out the carbs on both last year. When reassembled them I had trouble with the throttle return springs. If I put the spring with only 1 wind the tors seemed to kick in every once in a while. The throttle felt nice but would advance the throttle prior to moving off the tors switch. With an additional wind no tors problem but the throttle is a little heavy.
Cleaning them again this year and looking for advice on the assembly procedure on the spring.
Thanks
Tim
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top