Hardcore Sledder banner

1992 venture track change

952 views 1 reply 2 participants last post by  fitter002 
#1 ·
Does anyone have a link to a video showing the process of changing the track on a 1992 venture long track with reverse?

I'm new to this site and would appreciate any help or suggestions.

Thanks
 
#2 ·
no video but it is not a tough job. First. You do not need to remove or mess with chain case at all.
after removing the skid and upper carrier wheels n shafts
remove the Speedo adapter on the left side of the drive axle.
inthink there is a nut on the end of the shaft. You may not have to remove it. The shaft should slide out of the splines in the reverse case assembly. You will loose no oil during this. It is a nice set up.
you should be able to remove the track at this point.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top