Hardcore Sledder banner
1 - 4 of 4 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
cat dealer replaced my pull start rope got 2 pulls and snapped. I noticed that It was rubbing on the coolant hose clamp so I turnd the clamp around.They replaced the rope and the recoil and now the 1st pull it doesnt seem to turn the motor over kind of just a dead pull.After the 1st pull it starts but the rope only retracts half way do you think they wound the spring to tight
 

·
Premium Member
Joined
·
12,762 Posts
Sounds like two things are wrong..............

-spring not wound tight enough or spring damaged
-nut on the back side is not tight enough or pawl is worn / damaged

Best to pull it off again / find another dealer.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top