Hardcore Sledder banner
1 - 2 of 2 Posts

· Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
Ive got an 03 F7 with MBRP can now. Wondering some peoples combos with gearing and clutching i was thinking about 23/40 and the stock 53 helix? also anyone that has the bullseye air inserts, did you have to do anything to the computer or does it not lean it out enough to matter?
 

· Registered
Joined
·
2,269 Posts
Clutch - most recommended will be the kit Outdoorshop has ( http://www.theoutdoorshopinc.com/store ), other kits that work well are D&D ( http://www.ddracing.com ), Bikeman ( http://www.bikemanperformance.com ) and there are others but the 3 mentioned support the site. I run the D&D no problems and I like the gain.
Gears - 23-40 is a good choice, just switched to these last weekend so I can not tell you the gain from a personal standpoint but most that have done this have seen more top end speed.
Bullseyes - needs no changes to the computer, minor gain in throttle response, I close mine up when it is below zero.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top