[exrdr96]

I got a zr 600 cce and the rear skid isnt stiff enuff what should i do? My dial adjuster is to the max and the clicker is on 8 on my other shock. Do i need to adjust the hyflaxs? Shocks were just recently serviced also. :cn:

 

[zr52k]

maybe stiffer springs?? What do you have the triangles set at on the rear springs. how much do you weigh? I know my dads 02 CCE is a lot stiffer than my 00 zr500 even on the lowest clicker setting...

 

[exrdr96]

I only weight 160 how do you tell what setting the triangles are set on?is there a number on each end?

 

[FreezerBurnt]

I do not think the dial adjuster is there for making the sled ride stiffer

It is there for transfer aka more or less pressure on the front

Get some new springs IMO

Do i need to adjust the hyflaxs?[/b]

Yup make sure they are in hyper gear mode :lol2:

J/J

 

[BAJA22FT]

yup new springs

 

[mk2g60]

Remote arm adjuster won't stiffen it at all. It adjusts ski pressure, you need to turn it all the way out if you plan on riding any ruff stuff or you'll blow the shock. Rear clicker you won't notice any difference just sitting there you need to ride the sled. The sled is a few years old so like the other posts say replacing the springs isn't a bad idea, you may also need to revalve the shocks if that doesn't do it for you.

 

[zr52k]

Originally posted by exrdr96@Sep 19 2005, 10:05 PM
I only weight 160 how do you tell what setting the triangles are set on?is there a number on each end?
<div align="right">index.php?act=findpost&pid=882948

[/quote]
There is one one each side of the suspension that you use the spark plug wrench to adjust. Its on the stiffest setting when the thickest part of the triangle is facing toward the spring.

its #18 in the drawing

 

[MUSKOKA800]

Your rear springs must be baffed. At 160# even the softest cam setting should suffice. The 2002 CCE rear spring part numbers were updated in 2003. This leads me to believe they were problem springs from day one. Everyone I know who's owned a CCE had to change to stiffer rears. The 90 degree angle springs just don't cut it. Try some 83 or 75 degree replacements. The '99 ZR700 rear's work well.

 

[exrdr96]

Thanks guys ill give some of these things a try.

 

[exrdr96]

Well i tryed messing witht he tri angles i had them on med setting then i put it on the stiff one didnt do any thing no to menchion that there plastic and slip alot :banghead:

 

[FreezerBurnt]

Get billet triangles they are around $30