Hardcore Sledder banner
1 - 5 of 5 Posts

· Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
My friend has an 02 xc 600 that he is looking to add a bit of power to this winter. Right now he has clutching done, jetted down to 410's and 21/40 gearing. He is goin to get an slp air intake kit and wants to get a single pipe and possibly some reeds. I guess my question is what is the best single pipe for this sled and what reeds will work the best (if any). Also any other fairly cheap hop-up suggestions would be greatly appreciated.

-thanks-
 

· Registered
Joined
·
114 Posts
Really, your buddy would be throwing money away by replacing the pipe and reeds. There is very little to be gained, maybe 1-2 horsepower from each, Polaris has this engine tuned pretty good. If the clutching is dialed in, just ride it, save the extra money for gas!
 

· Registered
Joined
·
552 Posts
Originally posted by dmould@Sep 26 2005, 04:00 PM
Really, your buddy would be throwing money away by replacing the pipe and reeds.  There is very little to be gained, maybe 1-2 horsepower from each, Polaris has this engine tuned pretty good.  If the clutching is dialed in, just ride it, save the extra money for gas!
<div align="right">index.php?act=findpost&pid=893748
[/quote]


What he said. No gains with pipe and redds. Been there, done that. waste of $$$$
 

· Registered
Joined
·
30 Posts
Discussion Starter · #4 ·
alright, well thanks for the help guys. Would there be a benefit from twins? he was leaning more to a single because of the $$ but he wants something? How about porting on these sleds? anything or any other suggestions would be appreciated

-thanks-
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top