Hardcore Sledder banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Rush/Switchback (AXYS Platform)
    I need some advice. My 2017 Polaris Switchback Pro-S had a low idle, so I adjusted the TPS and set screw on the throttle body so the voltage was right around .94 VDC as per spec (it was lower than it should have been which explains the low idle). This fixed the idle issue, but now when I rev...
  2. Rush/Switchback (Pro-Ride Chassis)
    Its a 2011 Polaris Pro R 600. Had problems all last year with dying problems. Would go for a short distance then loose all power. After getting to a stop it would start first pull. This sounds like a typical TSS issue. We put back on a OEM riser bc the previous owner had a 6 inch and put the...
  3. Trail/Classic/XLT
    Hey everyone--new to the forum here and falling on my sword to ask the community for help! Picked up a project sled a few weeks ago (and I am far from a mechanic) - an '87 Indy 400 with 3,200 miles on the nose. The prior owner had bogging issues last season and sold the sled to me in "as is"...
1-3 of 3 Results
Top