Hardcore Sledder banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 98 Results
  1. Polaris General Discussion
    Hi all, I have to replace the track on my pro rmk and the best deal I can find right now is a camso challenger extreme 2.5 (9104M) To my knowledge the challenger extreme track will be heavier than the series 6 that’s on it now, will I have to adjust my clutching and or possibly a gear down? I...
  2. Matryx Platform (Indy VR1/Launch Edition/SBA 146)
    Hey everyone, first post here. Just wondering how everyone likes their matryx 650? I can find mountains of stuff on the 850 for the more loaded models like the vr1 or SBA. I've spring ordered a 2023 switchback sp 650 and was wondering how people are doing in terms of higher mileage for longevity...
  3. General Snowmobile Forum
    Hello, I have a 2008 Ski Doo Summit 800R PTEK. Was riding the other day and the dash kept coming on and off like the sled was restarting but it started running. Eventually I was riding and the sled just shut off completely, gauges are now stuck in a weird position and the sled won’t start. The...
  4. Polaris Wanted
    Have a solid engine looking for a chassis or parts sled. Please let me know what you have.
  5. Polaris General Discussion
    Ok so I just joined and also just purchased a new used sled.2001 Polaris XC 800 Picked it up last Tuesday, tested it on the trailer unfortunately I couldn't test ride but felt good about what I saw. So my first shake down run went well. So planned a 3hr ride with the boys and after about 1/2 hr...
  6. XC
    Hello, I am new to this forum, I need help my 2007 Polaris Xc sp 500 leaked out all its coolant/antifreeze. And I can’t find any of the 50/50 Polaris premix anywhere. Is there any other anti freeze I can use??
  7. IQ chassis
    Hi all, coming off a fresh complete rebuild. I have a iqr 660 VES sleds running great now aside from it seems it's hitting a "rev limiter" at 6-6200rpm wot or even trying to slowly get into it. Plugs are Darker brown but I'm running pre mix as well as oil injection for break in. Just cleaned...
  8. 440/race/modified
    New to the forum and am wondering if anyone could provide some information relating to the following issue. As mentioned, I have a 1991 Polaris Indy 400 L/C rejetted to 220 instead of 230. It starts great, idles great and runs great...most of the time. The other day I was out riding on the...
  9. Turbo 4 Stroke
    Hello there bought a 1998 700 rmk in the spring guy said fuel pump was bad, rebuilt fuel pump but now I have a problem where if I give the sled throttle it will idle up for a bit bit as soon as I let off it just dies was wondering what you guys might suggest I’m stumped not sure if it crank...
  10. Rush/Switchback (Pro-Ride Chassis)
    Its a 2011 Polaris Pro R 600. Had problems all last year with dying problems. Would go for a short distance then loose all power. After getting to a stop it would start first pull. This sounds like a typical TSS issue. We put back on a OEM riser bc the previous owner had a 6 inch and put the...
  11. Polaris General Discussion
    Recently got this sled. The problem is my clutch appears to have to much play or is loose. Sled is driving just the clutch makes annoying banging noises. So my question is is my clutch broken, are there parts missing or has it not been assembled right or wrong parts used etc. See pics below!
  12. Michigan-Only Classified
    2022 Arctic cat Zr8000rr I am selling a 2022 Arctic cat zr8000rr with less than 250 miles.. has 144 studs, lighted cat hand guards, heavy duty mountain black bumper, large touring bag, black cat mid-height windshield. This sled was snowchecked and Ive rode it 2 days.. perfect condition ...
  13. Polaris
    I am selling my 2018 800 Switchback Assault 144. Sled is in mint condition. It's never seen any damage and has only 100 miles on the current track (upgraded to a 2" Challenger from the 1.5" Ripsaw) Sled has been perfect. Always stored inside. The only reason I am selling is because I am moving...
  14. Polaris General Discussion
    Just recently (today) cleaned the carbs on my buddies Polaris 680 Ultra due to it not wanting to start easily and a bad idle. So I pulled them all out and cleaned them all. Set the screws back in the proper adjustment as they were before cleaning them. Now it's running super lean (smoking way...
  15. General Snowmobile Forum
    Hello, I have been going through my selfthat has been sitting for a few years. I removed all the old gas, rebuilt the fuel pump. Made sure the intake line was connected and the end is sitting in the gas. The fuel is not drawing into the fuel pump and into the engine. The only thing I can think...
  16. Polaris
    My hobby I started a couple years ago has grown in to more of a small business. We have expanded to making coffee cups, shot glasses, and wedge chassis nose cone screens. Our newest venture this winter is Indy Dash Plates Apparel. Shirts, hoodies, and more by Teespring. If you need to get ahold...
  17. Polaris General Discussion
    Last winter I rebuilt my 2009 switchback 600 only due to I having 8,000 miles and was getting low on compression… The engine builder at my work did it, we had all the seals replaced, and the crank trued, new bearings, brand new OEM cylinders and pistons. Also new inline fuel filter. TPS was...
  18. 440/race/modified
    As title states, just finished full rebuild of my 660 ves 2006 Iqr. I notice at idle the back side of the primary is rubbing on what looks like bulk head. Question is can you shim the backside of the primary out a bit or I possibly put a washer in the wrong place? Is it as simple is denting the...
  19. Parts Wanted
    Hi all, Looking to buy a rear bumper for my 2014 switchback assault 144 broke mine giving by brother a tow the other day and need to replace before heading out to Alberta later this month. if anyone has one locally (Winnipeg area MB) let me know what you'd want for it! also if anyone along the...
  20. Switchback Assault/SKS/RMK (AXYS Platform)
    Hello , hoping someone can help out . I am currently having trouble with my assault on start up . I start up the sled and is idling at 1800 rpm and suddenly dies on me . Start the machine back up and it’s good to go . It’s happening on every cold start , why is it dying on me ??
1-20 of 98 Results
Top