|12-06-2019, 08:31 PM||#1 (permalink)|
Join Date: Aug 2014
Secondary clutch bushing loose in bore
2014 M8000. The bushing on the sliding sheave of my secondary clutch was starting to fall apart, so I ordered a Cat replacement (pn 0648-831). Time to install it, it is loose in the bore of the sheave… outer diameter is about 5mils smaller than the bore. I couldn't compare with the old one because I broke it in half during removal. I also removed the bushing in the helix, which is the same as the moving sheave. This one I didn't destroy. It fits tight in the movable sheave bore just like the new one should. The new bushing is loose in the helix bore also.
Any one had any issues with these bushings?
I got another on ordered from Cat, we'll see how this one fits…
Thanks for any input!
|12-06-2019, 09:11 PM||#2 (permalink)|
Super Advanced Member
Join Date: Mar 2008
Current Sled(s): 2017 XF Cross Country 8000
Previous Sled(s): 92'580ext,99'zr700,03'zr900, 07'F8 SP,12' F8 SP,14'XF8000
Location: Meriden, CT
Favorite Riding Area: Forks, Milli, Woodford, N.B.
18-19 Mileage: 1300
17-18 Mileage: 1100
16-17 Mileage: 556 no mas
Riding Since: 1988
Sent from my SM-G955U using Tapatalk
IF IT AIN'T A CAT, It'S A DOG!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.