|Fusion This is a brand-specific forum. Posts on this forum are assumed to be questions aimed at similar model owners, and are not looking for comments of a sarcastic or "bashing" nature. Please be aware that if you violate this policy you are in danger of losing your posting privileges on this website.The calling out or posting of another members personal information IE phone number or address is prohibited.|
|10-11-2019, 11:13 PM||#1 (permalink)|
Join Date: Oct 2019
06 fusion ho 600 dragon electrical issues
ok so the sled was running and developed a leaky head gasket..fixed that got it all sealed up..now no spark...ive changed the cdi box and the coil..new stator comin tomorrow..does anyone know a way to test the system with a volt meter?
|11-03-2019, 08:00 AM||#2 (permalink)|
Join Date: Mar 2011
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Northstar Performance Products
Stage 1,2,3 clutch kits
Oil tank vent kits
Doo T-Stat bypass kits
Rush/Axys A-Arm bushing kits
550 fan upgrade kit
Our products have been race tested and proven all across North America!
Authorized dealer for
Klotz Racing Synthetics
|11-03-2019, 09:48 AM||#3 (permalink)|
Super Advanced Member
Join Date: Apr 2013
Current Sled(s): 2012 Switchback Pro R 800
Previous Sled(s): 2001 800XC 1999 XLTSP
as Rick suggested, try the throttle free play. You spent a lot of $$ chasing a problem that could be quite simple. Pins in your harness all good or maybe one of them is bent? Did you Ohm the stator before thinking that's the problem? On my old 800XC i could pull the single black wire down by the stator which would bypass all safety switches. I also had a problem where that wire was broken and i couldn't get it to start. Had to solder it back together.