HCS Snowmobile Forums - View Single Post - throttle body porting
View Single Post
Old 05-08-2019, 08:57 AM   #6 (permalink)
Tommcat
TommCat Performance
 
Tommcat's Avatar
 
Join Date: Mar 2005
Posts: 32,633
Current Sled(s): too many
Previous Sled(s): 10 F8, 06 F7, 03 ZR9, 02 ZL6, 98 ZR6, 86 El Tigre 6000
Location: Western Mass
Favorite Riding Area: Maine
Riding Since: 1977
Default

Quote:
Originally Posted by joe_f7 View Post
So it looks like it's all smoothed out and widened after the butterfly so it doesn't leak air past at idle like a bad bore job on a set of carbs like back in the day.
yep. i polished the area where the blades contact a tiny bit, but dont really remove material there, for that exact reason.
i'd like to do an actual over bore and use bigger throttle plates at some point, but this is a start.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Home of the only clutch kits that can save you from honey badgers
Tommcat is offline   Reply With Quote