HCS Snowmobile Forums - View Single Post - 2006 M6 temp sensor
View Single Post
Old 03-03-2018, 11:58 AM   #4 (permalink)
Super Advanced Member
fastcat800's Avatar
Join Date: Jan 2003
Posts: 836
Current Sled(s): 2014 XF 7000 SP LTD, 2006 M6
Previous Sled(s): 2006 XF 700, 2001 ZR 800, 1996 ZRT 800
Location: Plymouth, MN
Favorite Riding Area: MN's North Shore and ID, MT
18-19 Mileage 1985
17-18 Mileage: 2525
16-17 Mileage: 960
15-16 Mileage: 2410
Age: 70
Riding Since: 1971

Originally Posted by bee1971 View Post
Cold - They all did from what i remember , even when the temp sensor was working properly

With the engine running , grab the wire harness where it enters the sensor on the pipe and wiggle it around and see if you can get the light to cut out

You will not burn it down running a bad temp sensor on a 2006
After the light came on it has less hesitation when it is cold, but it is still there. I will check the wiring. I ordered a new GM sensor that guys on snow west say works. All you have to do is change the connector. $30 for the GM sensor $135 for the Cat one.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
fastcat800 is offline   Reply With Quote