HCS Snowmobile Forums - View Single Post - 2002 ZL 600 EFI servo cycle issue
View Single Post
Old 01-20-2017, 07:42 PM   #9 (permalink)
ndtorque
Super Advanced Member
 
ndtorque's Avatar
 
Join Date: Jan 2009
Posts: 3,484
Current Sled(s): 2000 ZR600...1995 ZR580
Previous Sled(s): 1996 ext580 and many others of all brands since 1975........
Location: Eastern North Dakota
Favorite Riding Area: anywhere there is snow !!
Age: 55
Riding Since: 1973
Default

when electrical starts running me in circles that do not make sense I always go back through and triple check every ground ..

Plug your voltage regulator back in as your dealing with AC voltage ....then take a look at the wiring diagram the efi/esr has a diode in the voltage regulator for the APV and a 7.5 amp fuse in line from the starter solenoid ...


http://countrycat.com/ccstore/kbase/.../2002_Snow.pdf

here are the wiring diagrams .. look close the ohm values are there for every coil and sensor ..
__________________
Originally Posted by LE_07F8

If you aren't feeding/f*cking/financing me, your opinion doesn't matter!!!

Last edited by ndtorque; 01-20-2017 at 08:20 PM.
ndtorque is offline   Reply With Quote