I need to know if vforce reeds that were bought for a 440 will work on a 600 VES??

thanks

Anybody know??

what year are the sleds

Yes If you are changing the whole reed block.The 440 racer had vforce from the factory and the 600 had the regular 4 petal style.the 440 block will bolt in in place of the stock ones.

I'm not disputing what any one says. The reed blocks from a 06 Fusion 600 don't fit the 600 ves. When I bought V-Force reeds for my Fuse 6, they were the same part # as what fit a 440 racer? Seems there is a difference somewhere, maybe depending on the year?

Reeds from an 06 racer 440 will fit an 06 Fusion/RMK 600. The HO 600 used the big reed case which is the same reed block as the old Big Blocks. When going to the V-Force III on the HO, you can either use 440 stuffers or not. Also, be sure to look into the reed spacer the western guys were using to keep from losing fuel pump implulse pressure and running out of fuel on long pulls. The 600 HO sounds really sweet at 8300 with a pipe on it but running out of fuel before the top of a pull is "exciting". On the flat, you usually end up with detonation that turns on the DET light and it will retard itself into a funk all the way down to 6300rpm or so.

2F7s, do you know who makes the reed spacers or who sells them? I called VF and asked them about the spacers because i've heard it on this site the,Tech and the office staff told me that is not true and none are needed. The tech told me to drop the e-cilp one notch. That it acts that way if the needle is to lean.

I have a brand new set for sale. $150 anyone??