Full Version: XLT with m10
Ima wondering if a M10 from a 2002 XC800 will bolt into a 1994 xlt, -evan if i have to drill a hole or two thats fine-
Hey RatRod,I didn't have time to scan the instructions last night, computer problems, I'll try tonight. Later.
when ever man, theres no snow yet lol
I've got an M-10 in my 98 XLT and I needed to do A LOT more than drill a few holes. You'll need an installation kit from FAST that fits your sled. I believe that run a little over $100.
The kit contains many brackets and plates, mounting bolts and a ton of heavy duty rivets.
The kit contains many brackets and plates, mounting bolts and a ton of heavy duty rivets.
QUOTE(GearHd6 @ Jul 10 2008, 07:45 PM) 
I've got an M-10 in my 98 XLT and I needed to do A LOT more than drill a few holes. You'll need an installation kit from FAST that fits your sled. I believe that run a little over $100.
The kit contains many brackets and plates, mounting bolts and a ton of heavy duty rivets.
The kit contains many brackets and plates, mounting bolts and a ton of heavy duty rivets.
Is yours the older metric or the newer non metric. I have a metric m-10 in my 94 xlt, it wasn't to hard to install, just had to be carefull where to drill the holes. I agree he will need the install kit if he dosn't have it. best bet would be to call fast. His skid came out of an edge so I'm sure its different then mine.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.