Hey I have a question for anyone with experience of this I have a cracked belly pan in a 2001 MXZ Adrenalin 700 and I was wondering how much of a pain it is to change it cause everything in it has to come out how many hour about will this take and how hard is it to get a new one on and what kind of rivets hold it togeather, because all I have is a regular rivet gun I hope I dont need a special one when putting the new pan on thanks,
KORY
Full Version: 2001 MXZ 700 Belly Pan change
QUOTE(theskidoookid @ Mar 31 2008, 11:31 AM) 
Hey I have a question for anyone with experience of this I have a cracked belly pan in a 2001 MXZ Adrenalin 700 and I was wondering how much of a pain it is to change it cause everything in it has to come out how many hour about will this take and how hard is it to get a new one on and what kind of rivets hold it togeather, because all I have is a regular rivet gun I hope I dont need a special one when putting the new pan on thanks,
KORY
KORY
I am about to do the same thing... From the research I have done on dootalk.com I would suggest you get an air rivet gun... other than that just make sure you don't overdrill the rivets and make the hole too big. I would also suggest BRP rivets from a dealer... they cost peanuts and shouldn't hurt your wallet...
Parts are available check any scrap skidoo place... sledparts.com etc...
With a helper it should take about 4 hrs...
need to remove tailing arms and exhaust....
good luck
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.