K so I got a phazer fx that was bustted up a little bit and I have fixed it up but now i'm having issues with the reverse not working. At first it went in hard and would get stuck in neutral, which after I got it idled down seamed to be fixed and it was working. Then one day I was doing some work on it, putting on a new tail light and new hand warmers, it simply went from working to nothing and it doesn't even try to kick in or anything. I checked the relays, and fuses and they check out fine. I'm wondering if anyboday has had any issues with these or if there is something I'm just forgeting to check?

Rock it back and forth, every phazer has this issue rock it back and forth a couple times.

Yeah but now nothing at all is happening. I just checked they gear motor which is working but for some reason I'm not actually getting power even to it. I'm starting to think i'm having a ground issue

Try one more thing, slam pick the rear end up and slam it down.

If that does not work you have a problem, i'd imagine something you have done because this is not an issue, if you are still under warantee, go in and get the reverse shimmed.

Obviously, you have a wiring issue. Especially if you know you are not getting power at the reverse servo.