Well finally got all my stuff rounded up and it needs to go. Make some offers. Pm me for pictures if interested


SNO PRO AND FIRECAT PARTS:


-Airbox Firecat/SP

-White SP handlebars/grips/throttle block and lever/kill switch/ hot start button

-Black # plates for SP

-2 Servo Motors for SP or Firecats

-05 SP spindles fresh black powdercoated

-1 04 lower right side A-arm powdercoated black

-1 04 upper A-arm powdercoated black

-SP handle bar pad of my 04

-Left 8" and Right 6.25" hand grip for firecat and SP

-Throttle lever new in package

-04 SP main wiring harness

-Reed Valve Assembly, from the carb boots to the reed gaskets

-Exhaust donuts for SP 440

-Exhaust vavles assembly with cables

-Coil Ignition

-CDI stock as of now. Can get it reprogrammed if wanted

-Exhaust vavle condensor

-Exhaust valve regulator

-Timing dial control

-Recoil

-Kill switch

-40 1.5 Woody carbide studs with 20 alluminum double backers and 7 single alluminum backers

-Acerbis handgaurds, orange/black, NO mounts just the handgaurds

-2004 Sno Pro with a 700EFI with many extras



Mid 90's ZR PARTS:


-Rear skid out of a 94 ZR 580 or will part out

-3 Sets of handlebars, 2 are for pre 97 models and one is for a 97(bar connecting across on top)this one comes with green par bad

-2 Recoils

-2 Throttle blocks with kill switch for mid 90 ZR's, one throttle lever

-Belt gaurd off of a carb 580- Jetting decal on the gaurd

-2 Bogey wheels

-40mm Mikuni Carbs and comes with UFO's that are not installed

-Throttle cable NEW in package fits these models:

http://www.rvsports.com/pages/parts/viewby...efault.aspx#top

-20T top gear, 41T bottom gear, and a 72p chain

-Speedometer for 97-99 area with plastic mount, 2,394.5 miles, Looks like the mid 90's but bigger numbers and lines

-2 rear bogey wheels

-40 pull through ice pics and 20 backers

- A set of 45.4 gram weights, A1 is stamped on one side and 6 is stamped on the other side

-Set of plastic stops for your feet. They go down by the belly pan and up against the tunnel to help secure your feet

_

Also have another servo motor, exhaust valves, and cables of a F7 EFI

Hey Jay
Can i get pics of the white handle bar assembly and of the 04 handle bar pad. Started riding again ribs are doing good going jumping on the pipeline tonight.
Thanks Tony

how much for the black # plates?

# plates are sale pending. Sent ya a message Tony

Never got the PM Jay?

Ya sorry about that Tony, had to take off right after I wrote that. Well sprained or broke my ankle last night in B-ball. Out of work once again, hopefully just for a day or two and just swallon.

Are you accident pron? baseball or basketball?

Just a couple of sprained ankles in high school, but this past year has been hell. Between this(X-Rays were negative) and last summer slicing my hand open and cutting 3 nerves and 2 tendons in my hand. Its all catching up to me now. I need to get my ass back to work to, this sucks sitting at home.

05 spindles and # plates are sold

One servo sold

Jay, the spindles look great, thank you. Perry

pm with price and pics of orange handguards plz...thanks

Will PM you when I get on my computer.



I also have a brand new BMP F7 stealth pipe, 0 miles on it. Set it in place while fitting the 700 motor and thats it. It has the mount on it for a 04 F7 style. Bracket comes off of the bulkhead that holds the rubber piece, unlike the 03's had the rubber ball mounted to the y manifold.

Used BMP F7 can, around 200 miles on it

Brand New BMP inline fuel reducer with gauge

Used EGT Racepack, digital gauge(Tach, 2 exhaust temps), cable and probes, easy access button, and custom bracket to mount to the handle bar riser. Heres a website that shows the kit and retail price.

http://www.exhaustgas.com/ProductDetail.as...tID=&RepID=


PM me for pictures and prices

Hi,

Is the S/P throttle just a lever or the assembly with the aluminum block? If its an assembly, I could use one.

Thanks,

-Joe Rainville
joerainville@hotmail.com

How much for the complete EGT Racepack setup?

The one in the package is just the plastic part. I do have the alluminum block one that are on the white handle bars





PM Sent

Heres some pics

Racepack $290 shipped

BMP Fuel Reducer(NEW) $55 shipped

how much r asking for your sled?

How much do you want for your sled?

$5000 once I get the motor freshened up.