Hi everyone. I own a 07 FX and love it but had some real problems getting it to turn, i've read some of your comments and decided to put in my 2 cents on my final set up. I have 96 studs, 6 inch duelly carbides to start, now, for cornering and being able to lay on the gas through a corner i installed some Arctic Cat weight transfer blocks off a 2003 F7, i believe there set at medium or position 2. Next, i pulled the limiter strap up 2 holes and loosened the center shock spring as much as i could, just so it's snug. Then i loosened my front shock springs about a quarter of an inch. (I weigh 155 lbs.) I've tested for hours and it took a bit, but most of this is free and easy, this is not a guess, it works, this sled rails corners now! Hope this helps a few of you, when i bought mine, that was my only complaint. I'm a northern Wi. rider on tight hard pack, probably different ball game for you off trail, deep snow guys.

Welcome!

sometimes all it takes is to spend time getting to know your sled. they dont fit everyones driving style out of the box. i have done the same adjustments as you over the span of three months and find the sled to be a decent trail sled. kinda surprises some people when i ride away from them.