what exactly are the coupler blocks?how do i remove them from my 07 153 M6?if i remove them it will cause the sled to?

pics would help ,thanks in advance

M series do not have coupler blocks.

You should get this question answered before the other two... If you remove them you change the weight transfer of the sled... your ski's have a tendency to point skyward.. Is that what you are trying to accomplish? Because, when this happens and your not expecting it..... Now if your running powder which I suspect you are with an M6 then ya....

so do i have them?if i do then how do i remove them?

i ride flatland feilds,which is powder and some hard snow conditions
it would be more fun for me to get more wieght transfer,and im not saying this to show off cause in 16 but my freinds cf is more fun and he can get the skies off the ground a few feet for jumping,i have basically no ski lift on flat,maybe and inch at the most .i just want more lift..limiters are all the way lose already.i dont think this should be to hard to get a foot or 2 off the ground considering its a 153 by 2.25,i dont need to catwalk i just want it to be more fun

No, your 2007 M6 doesn't have them.

http://www.hardcoresledder.com/forums/inde...=coupler+blocks

Here's a post, that will answer your questions on what coupler blocks do on machines with them. Most mountain sleds don't have them.

M series do not have them. My M stands straight up anyways whenever I want. Helps for getting on top of the snow quickly. I see everyone else riding thru the deep powder and Im floating on top.

new float suspensions on the '08 dont stand straight up... i cant get mine too at all... stays pretty flat. geo on snowest have a little mod that moves the rear scissor forward some which was allowing wheelies or just a better overall ride. havent tried the mod yet.

Let out the limiter strap all the way. That will help some. But you will have very little ski pressure so it will not steer to well on the trails.

there is also a geo mod for the o7's whick moves the front arm down about half and inch if i remember, i would do it if i could get some pics so that i dont mess something up because i dont see any bracket with holes on the inside of my tunnel,plus wouldnt there be a better chance of stabbing ure track because the front tips of the rails would be lower?im sure it wouldn't but just a thought



my limiter straps are all the way loose already,i dont ride trails so im not worried about that,i just want it to be more fun
thanks everyone,heres the geo mod link.
http://www.snowest.com/forum/showthread.php?t=41154