wut length studs should i put on a 1 1/4 inch inch track? and wut diameter stud is best to go with???

thanks

Mitch

just my opinion, save your money. invest into a long track. i have studs on my 1 1/4 and hate it. I'm throwing the track away and getting the 136 kit.

I have a 136 AND studs... I love it... I used 162 1.325" Woody's Golddiggers on my 1.25" Ripsaw

The Woody's recommended stud length for trail riding is 1.325", and I would run nothing but the 5/16th studs.

On my Dragon 700 with a Ripsaw last year I was VERY happy with 96 1.325" studs up the center with double backers, however I do not stud for hole shot, but rather icy corners and such. Depending on what the machine is and what you are trying to achieve, you may want more studs...everyone is different.

PM me for a quote when you know what you want, I sell all Woody's stuff 20% off.

Doug

Got my studs, carbides and track from Doug, good prices and fast shipping!

I got an 1 1/4" Ripsaw from him last year and this year I added 144 Gold Diggers in the middle on my 02 700 XCSP. Hooks up so well I had to change my clutching to compensate. Stud length is 1.325" like others have said.

I also bought my studs from Doug, I bought 54 round single and 54 doubles with tall nuts, as well as new hyfax and idler wheels... excellent service and very quick shipping

i also have 144, 1.325 on my 1 1/4 ripsaw Hook up and go

I used the woodys mega bites, 96 total with studboy double backers
(they are more rounded than woodys).

I have a .91 track and went with 1.075.
I have the max. penetration that you want .375 but atleast .25 min.

thanks for the input guys i got a real good idea now wut i need to get!

I run 96 1.52s down the middle of my 1.25" ripsaw and it works great. Keep in mind that different manufacturers measure their studs differently. As Lucks stated .25-.375 is what you want for penetration.

Long tracks hook up better but you sacrifice handling.