Help - Search - Members - Calendar
Full Version: 2004 polaris pro x2 for sale $3,250 o.b.o.
HCS Snowmobile Forums > State and Province Snowmobile Forums > US Snowmobile Forums > Alaska > Alaska-Only Classified Section
Andrewak75
I am selling a 04 Polaris PRO X2 700cc
short track 121" x 15" x 2"
Walker Evans remote-reservoir needle shocks all around
this sled is clutched and geared to perfection
H.P.S. can, Holtzman Engineering Tempa Flow
the snowmachine is $3,250 o.b.o.
This sled absolutely rips give me a call to come take a look at it. (907) 382-6520 Andrew
rensminger
I have a pro x2 600 what add ons did you do to get the sled to rip as you call it I am going to put in a set of v force reeds and gut the air box I have not pulled the clutches aprt but it looks like a yellow primary any info would be great





QUOTE(Andrewak75 @ Feb 16 2008, 10:38 PM) *
I am selling a 04 Polaris PRO X2 700cc
short track 121" x 15" x 2"
Walker Evans remote-reservoir needle shocks all around
this sled is clutched and geared to perfection
H.P.S. can, Holtzman Engineering Tempa Flow
the snowmachine is $3,250 o.b.o.
This sled absolutely rips give me a call to come take a look at it. (907) 382-6520 Andrew

Andrewak75
QUOTE(rensminger @ Feb 17 2008, 03:59 PM) *
I have a pro x2 600 what add ons did you do to get the sled to rip as you call it I am going to put in a set of v force reeds and gut the air box I have not pulled the clutches aprt but it looks like a yellow primary any info would be great


Add-ons? i really dont have any add-ons, ive listed what i have done. what i am recommending you do is a little research on tunning sleds
i read some of your other posts im not sure what your definition of fast is my sled does around 80mph because of the steep gearing. Change your helix in your secondary over to something else maybe a straight angle(once again dont know what your looking for). Gears, gears gears, find a gear chart. As far as gutting the airbox i only took out the foam in it, sealed the airbox with rtv and took that slp mesh (the stuff that lets air through but not water) over the opening. work on carbs to run probably leaner than recemended.
i will try to pm you some basic tuning info that i have on my computer but all the info you need is on this web site you just need to dig a little bit
Andrewak75
if your really needing more power remember there is no replacement for displacement!!! Just put a big block in there or send your engine to carl cylces and get a 797 kit. i hope the information i have sent you will be helpful remember that is just the engine stuff dont forget about your chassis. that rear skid needs to be modified to remove the 4+" of slop. proper valving of the shocks and the right torsion springs. my brother seems to have pretty good power out 600 but it is also a mod i guess you gain like 15%+ pwer running race fuel; it just sucks spending $8 a gallon


this has all been done to my sled and it is still for sale
Andrewak75
pictures
Andrewak75
pics
Andrewak75
QUOTE(Andrewak75 @ Feb 18 2008, 03:27 PM) *
pics

Andrewak75
rode it this weekend ran great
Still for sale
make an offer
Andrewak75
really need to sell now
just found out i need: pretty much a new drive train in my truck ie rear & front ends, cv's and much more!!! russian_roulette.gif
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2008 Invision Power Services, Inc.