Im new to the forum but ive been told you guys are pretty helpful Ive got a 99 machz Jaws drag pipes exstensive port and head work dyno runs indacate 221hp @10000rpm im having trouble getting it to the ground im learning as i go about clutching does any body have some setups to try and some times that i should be running in 660 and 500 ice any info would be great

is it 136 or 144 dragrace camoplast track? do you have a drag race suspension, wahl, proline, anderson? Will need 300 or more picks&chisels to hook-up. I asume you have a 4 tower clutch, what are coming in at? with my mod racer, have tried a dozen helixs & 6 or 7 diferent weight ramps to find what motor likes. You are turning motor right-up there, are you out of powerband? What size drivers and what are you runing for gearing? Imposible to sugest a set-up with out knowing more!

Hows it going it is a 99 machz 136 track 148 chizels set of jaws pipes running 283 ramps with 11.5 grams on stock arms and engaging at 5800 major port work with 35mains secondary has 25bs and a 5 helix it does well but it has alot more in it i think ive only ran a few races with it as for the suspenion its stock im running imp mod also im trying to lighten it before the grass starts got any sugestions

i fogot to tell you the geraring im running 22/43 thanks hope to hear what you suggest