as the title says my 75 tnt 440 is only running on the belt side cylinder. it has 160psi of compresion on both sides.i replaced the coil on the fan side both plugs and plug wires hoping that was the prob and i cleaned the points but all that didnt help. it is definitly geting spark to both sides with the plugs sitting on the block. also while its is idling every so often you'll hear a pop which i think is the cylinder trying to fire but i'm not sure. any suggestions how to fix this would be very very apreciated

thanks Nathan

The only thing left is the condenser. But it could also be a plane old bad connection in the low voltage wiring.

Check the connectors in the harness. My best guess. Good luck.

Is it dual carb? I wonder if you are having a fuel problem. Even if it is a single carb, the intake gasket could be gone.

connectivity in the harness seems good its single carb and the gasket is good but after talkn to a few guys i'm prety sure its the condenser now my question is where can i get a condenser i havent seen any on ebay